Filter Photos By
Reset Filters

Viewing: Drill Lines

High Speed Carbide Drilling

Machines
Speedy Sub-X spindles give the PeddiSubX-1120 the ability to mill out copes in just 90 seconds!
Machine: PeddiSubX-1120
View Full Image

Plasma Marking

Machines
Mark on all four sides of material simultaneously with plasma marking. Optional part marking tools are stored within each of the drilling axes and selected upon program command.
Machine: PeddiSubX-1120
View Full Image

Enhanced Clamping System

Machines
The PeddiSubX-1120 employs the most aggressive 14-point clamping system for maximum rigidity of the workpiece. Carbide drilling, milling and tool life is best achieved with the least amount of vibration possible.
Machine: PeddiSubX-1120
View Full Image

Countersinking

Machines
Effortlessly countersunk holes on the PeddiSubX-1120.
Machine: PeddiSubX-1120
View Full Image

Drill and Mill Simultaneously

Machines
With the ability to drill and mill out copes in just 90 seconds, the PeddiSubX-1120 has revolutionized structural steel drilling technology once again. An operating area of 19.68” (500 mm) per spindle allows processing on an entire section of material without spindle downtime.
Machine: PeddiSubX-1120
View Full Image

Weld Preparation

Machines
Simultaneously drill and mill weld preps in seconds on the PeddiSubX-1120.
Machine: PeddiSubX-1120
View Full Image

Common Rat Holes

Machines
The most commonly used rathole within the structural steel industry can be processed in a matter of seconds on the PeddiSubX-1120.
Machine: PeddiSubX-1120
View Full Image

6-Station Tool Changers

Machines
Powered by 25 HP (18.5 kW) Siemens motors, the PeddiSubX-1120 is outfitted with 3 drill spindles, each equipped with 6-station tool changers.
Machine: PeddiSubX-1120
View Full Image

High Speed Carbide Drilling

Machines
Powered by 25 HP (18.5 kW) Siemens servo motors with a speed range of 0-3000 RPM, the Peddi XDM-630 is outfitted with 3 drill spindles, each equipped with 5-station tool changers.
Machine: Peddi XDM-630
View Full Image

Slot and Cope Milling

Machines
Slot and cope milling on the Peddi XDM-630 has been refined to produce a mirror-shine machined finish that completely eliminates grinding after drilling operations.
Machine: Peddi XDM-630
View Full Image

Sturdy Drill and Saw Clamping

Machines
The Peddi XDM-630 employs a series of support clamps in order to achieve optimum rigidity of the workpiece through the machine.
Machine: Peddi XDM-630
View Full Image

4-Axis Carbide Drilling

Machines
By combining sophisticated Siemens electronics, high-speed carbide drilling and superior feedback, the Peddi XDM-630 spindle is more versatile and more efficient than all others before it.
Machine: Peddi XDM-630
View Full Image

Straight and Miter Cut Sawing

Machines
The double miter design on the Peddi XDM-630 accommodates up to 60° cut angles both right and left, and allows for smooth processing of the entire profile with remnants as small as 13" (330 mm).
Machine: Peddi XDM-630
View Full Image

4-Axis Carbide Scribing

Machines
A 4-axis layout marking attachment eliminates human error in manual layout methods.
Machine: Peddi XDM-630
View Full Image

Tapping

Machines
Effortlessly tapped holes on the Peddi XDM-630.
Machine: Peddi XDM-630
View Full Image

5-Station Tool Changers

Machines
With a machine as versatile as the Peddi XDM-630, a robust tool change method is required to maintain ultimate efficiency.
Machine: Peddi XDM-630
View Full Image

High Speed Carbide Drilling

Machines
Powered by 25 HP (18.5 kW) Siemens spindle motors, the Advantage-2 is outfitted with 3 drill spindles, each equipped with 5-station tool changers
Machine: Advantage-2
View Full Image

4-Axis Carbide Scribing

Machines
A 4-axis layout marking attachment eliminates human error in manual layout methods.
Machine: Advantage-2
View Full Image

Sturdy Drill Clamping

Machines
The Advantage-2 employs a series of support clamps in order to achieve optimum rigidity of the workpiece through the machine. Carbide tool life is best sustained with the least amount of vibration possible.
Machine: Advantage-2
View Full Image

MultMaster Measurement

Machines
The MultMaster works as an extension of the Roller Feed measurement system in order to perform cuts which may otherwise require manual positioning for programs with many small pieces.
Machine: Advantage-2
View Full Image

5-Station Tool Changers

Machines
The Advantage-2 is outfitted with 3 drill spindles, each equipped with 5-station tool changers.
Machine: Advantage-2
View Full Image

Ball Screw Feed

Machines
A precision ball screw feed mechanism allows for more accurate feed rates that provide better hole quality.
Machine: Advantage-2
View Full Image

4-Axis Carbide Drilling

Machines
Powerful 25 HP (18.5 kW) Siemens spindle motors allows for maximized operating time and drill hole quality.
Machine: Advantage-2
View Full Image

Roller Feed Measurement

Machines
Peddinghaus’ patented Roller Feed Measurement system exceeds the industry standard for roller measurement technology. Accuracy is not compromised even despite deviations in material.
Machine: Advantage-2
View Full Image

High Speed Drilling

Machines
Powered by Siemens spindle motors, the Advantage is outfitted with 3 drill spindles.
Machine: Advantage
View Full Image

4-Axis Carbide Scribing

Machines
A 4-axis layout marking attachment eliminates human error in manual layout methods.
Machine: Advantage
View Full Image

Roller Feed Measurement

Machines
Peddinghaus’ patented Roller Feed Measurement system exceeds the industry standard for roller measurement technology. Accuracy is not compromised even despite deviations in material.
Machine: Advantage
View Full Image

Sturdy Drill Clamping

Machines
The Advantage employs a series of support clamps in order to achieve optimum rigidity of the workpiece through the machine.
Machine: Advantage
View Full Image

4-Axis Carbide Scribing

Machines
A 4-axis layout marking attachment eliminates human error in manual layout methods.
Machine: BDL-1250/9D
View Full Image

Countersinking

Machines
Effortless countersinking on the BDL-D.
Machine: BDL-1250/9D
View Full Image

Tapping

Machines
Effortless tapping on the BDL-D.
Machine: BDL-1250/9D
View Full Image

9-Spindle Carbide Drilling

Machines
The three drill assemblies on the BDL-1250/9D operate simultaneously or independently of one another using either the same or different drill diameters, speeds and feeds.
Machine: BDL-1250/9D
View Full Image